High-Speed Differential Probe Series HSDP
1MΩ || 0,6pF input
■ ±8V, ±20V, ±42V models
■ ±60V common mode voltage
■ Ideal for debugging and verification
of serial busses
■ Up to 7.5m cable length for
reaching test points far away
HSDP Series, >4GHz, up to ±42V, up to 7.5m
The HSDP series offers best-in-class performance with >2GHz models up to ±42V differential input range, and ±8V models up to >4GHz bandwidth. The high input impedance, low noise, and 60V common mode voltage range the different models ideal for various in-circuit measurements for design, validation, debugging of analog signals, such as used in switched mode power supplies. The HSDP probes series is also ideal for characterizing a wide range of serial bus designs, supporting the most popular serial bus interfaces, such as USB2.0, Ethernet (GbE), CAN/LIN, I2C, SPI, SATA, FireWire (1394b), FlexRay, HDMI etc.
The HSDP Series features the industry standard 2.54mm (0.1") socketed inputs that can easily interface to a variety of connectivity options available in the market. The compact probe head design, and its variety of accessories, makes the HSDP Series ideal for probing on today’s smallest IC devices.
The ±12V input offset capability extends the dynamic input range of the probe. Having an input impedance of 1MΩ || <0.6pF between the probe tips, allows the HSDP Series to be used to probe sensitive circuits without adversely loading the circuit under test.
All models are available with either a 7.5m or 2m cable length. These longer cable versions enable the user to probe remote, hard to reach test points that are impossible with the other probing solution in the market today.
The HSDP Series has a universal BNC output connector and is compatible with any oscilloscope with a 50Ω input impedance, or 1MΩ input impedance and a 50Ω feed-through termination, allowing the HSDP Series to be used on any oscilloscope in the lab.
HSDP Series’ DC offset can be controlled via remote control.
A PMK power supply unit is required. These are available with a USB interface and are optionally available with a LAN interface. Remote control of the probe is made possible by the power supply unit.
The exact range of functions of the probes is described on the page linked below for the respective software solution.
Several software solutions are available for remote control of PMK products:
The 1 channel battery pack power supply AP-01 provides >8h of portable and isolated operation, which allows the user the flexibility of where the probe can be used.
The AP-01 supplies power only to the probe with no software remote control.
Find out more about AP-01 here: Power Supplies
ISO17025 calibration upon delivery or as re-calibration is available on request.
Probes WITHOUT Power Supply (to be ordered separately - see below)
| Image | Notepad | Article | Attenuation | Bandwidth (-3 dB) | Dynamic Range | Cable Length | Noise* |
|---|---|---|---|---|---|---|---|
HSDP4010 Differential probe | 10:1 | 4 GHz | ±8 V | 1.3 m | < 2 mV RMS | ||
HSDP2010 Differential probe | 10:1 | 2 GHz | ±8 V | 1.3 m | < 1.5 mV RMS | ||
HSDP2010L Differential probe | 10:1 | 1.8 GHz | ±8 V | 7.5 m | < 2.5 mV RMS | ||
HSDP2025 Differential probe | 25:1 | 2 GHz | ±20 V | 1.3 m | < 3 mV RMS | ||
HSDP2025L Differential probe | 25:1 | 1.8 GHz | ±20 V | 7.5 m | < 5 mV RMS | ||
HSDP2050 Differential probe | 50:1 | 2 GHz | ±42 V | 1.3 m | < 6 mV RMS | ||
HSDP2050M Differential probe | 50:1 | 1.8 GHz | ±42 V | 3.5 m | < 6 mV RMS | ||
HSDP2050L Differential probe | 50:1 | 1.8 GHz | ±42 V | 7,5 m | < 10 mV RMS | ||
HSDP1510 Differential probe | 10:1 | 1.5 GHz | ±10 V | 1.3 m | < 1.5 mV RMS | ||
HSDP1010 Differential probe | 10:1 | 1 GHz | ±10 V | 1.3 m | < 1.5 mV RMS | ||
HSDP0510 Differential probe | 10:1 | 500 MHz | ±10 V | 1.3 m | < 1.5 mV RMS |
Probes WITH Wall Plug Power Supply
| Image | Notepad | Article | Attenuation | Bandwidth (-3 dB) | Dynamic Range | Cable Length | Noise* |
|---|---|---|---|---|---|---|---|
HSDP4010-BUN1 Differential probe | 10:1 | 4 GHz | ±8 V | 1.3 m | < 2 mV RMS | ||
HSDP2010-BUN1 Differential probe | 10:1 | 2 GHz | ±8 V | 1.3 m | < 1.5 mV RMS | ||
HSDP2010L-BUN1 Differential probe | 10:1 | 1.8 GHz | ±8 V | 7.5 m | < 2.5 mV RMS | ||
HSDP2025-BUN1 Differential probe | 25:1 | 2 GHz | ±20 V | 1.3 m | < 3 mV RMS | ||
HSDP2025L-BUN1 Differential probe | 25:1 | 1.8 GHz | ±20 V | 7.5 m | < 5 mV RMS | ||
HSDP2050-BUN1 Differential probe | 50:1 | 2 GHz | ±42 V | 1.3 m | < 6 mV RMS | ||
HSDP2050M-BUN1 Differential probe | 50:1 | 1.8 GHz | ±42 V | 3.5 m | < 6 mV RMS | ||
HSDP2050L-BUN1 Differential probe | 50:1 | 1.8 GHz | ±42 V | 7,5 m | < 10 mV RMS | ||
HSDP1510-BUN1 Differential probe | 10:1 | 1.5 GHz | ±10 V | 1.3 m | < 1.5 mV RMS | ||
HSDP1010-BUN1 Differential probe | 10:1 | 1 GHz | ±10 V | 1.3 m | < 1.5 mV RMS | ||
HSDP0510-BUN1 Differential probe | 10:1 | 500 MHz | ±10 V | 1.3 m | < 1.5 mV RMS |
Power Supplies (to be ordered separately)
| Image | Notepad | Article | Mains | Output Current (max.) | Noise* | Channels | Output Voltage | Power | Immunity |
|---|---|---|---|---|---|---|---|---|---|
889-09V-PS2 2ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 2 | ± 9 V | 20 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS2-L 2ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 2 | ± 9 V | 20 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS3 4ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 4 | ± 9 V | 40 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS3-L 4ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 4 | ± 9 V | 40 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS6 8ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 8 mV RMS | 8 | ± 9 V | 60 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS6-L 8ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 8 mV RMS | 8 | ± 9 V | 60 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-AP01 AP-01 (Battery Pack) | 700 mA DC | 1 | ± 9 V | 20 W | |||||
890-520-900 Probe connection cable 0.5 m * | |||||||||
890-520-915 Probe connection cable 1.5 m |
(*) The power supply cable (0.5 m) is included as standard with all PMK probes requiring a PS02/03/AP01 power supply.