Robust Active Probe for Troubleshooting Sonic® 4000
■ ±12V Input Offset Voltage
■ Single-ended
■ Short-circuit prevention due to
high-impedance reference connection
■ 2MΩ / 0.6pF Input Impedance
■ Universal Use with BNC Connector
■ Output Termination 50Ω AC/DC
■ Variety of Accessories for individual Contacting
■ Remote Control with power supplies PS-02/03
■ Power Supply to be ordered seperately
Sonic®, DC to >4GHz, ±20V
The Sonic® 4000 active probe offers best-in-class performance and is easy to use to make in-circuit measurements. With the Sonic® 4000's DC to > 4GHz bandwidth, high input impedance, low noise and ± 8V dynamic range makes it the ideal probe to use with any oscilloscope or other 50Ω measurement system. Sonic® 4000's ± 12V input offset capability extends the input voltage range of the probe. The input capacitance of <0.6pF parallel 2MΩ between probe tip and probe reference (1MΩ to the oscilloscope ground) provides the highest impedance in its class to allow the probing of sensitive circuits without adversely loading the circuit under test.
Sonic Series’ DC offset can be controlled via remote control.
A PMK power supply unit is required. These are available with a USB interface and are optionally available with a LAN interface. Remote control of the probe is made possible by the power supply unit.
The exact range of functions of the probes is described on the page linked below for the respective software solution.
Several software solutions are available for remote control of PMK products:
The 1 channel battery pack power supply AP-01 provides >8h of portable and isolated operation, which allows the user the flexibility of where the probe can be used.
The AP-01 supplies power only to the probe with no software remote control.
Find out more about AP-01 here: Power Supplies
The cable length of 1.3m can be customized on request.
Accessories
Step 1: Select Probe (Probe only)
| Image | Notepad | Article | Attenuation | Bandwidth (-3 dB) | Max Input Voltage | Input Impedance | Dynamic Range |
|---|---|---|---|---|---|---|---|
SONIC1000 SONIC® 1000 | 10:1 | 1 GHz | ± 60 V | 1 MΩ / 0.6 pF | ± 15 V | ||
SONIC1500 SONIC® 1500 | 10:1 | 1.5 GHz | ± 60 V | 1 MΩ / 0.6 pF | ± 15 V | ||
SONIC2500 SONIC® 2500 | 10:1 | 2.5 GHz | ± 20 V | 2 MΩ / 0.6 pF | ± 8 V | ||
SONIC4000 SONIC® 4000 | 10:1 | 4 GHz | ± 20 V | 2 MΩ / 0.6 pF | ± 8 V |
Step 1: Select Probe (with Power Supply PS05)
| Image | Notepad | Article | Attenuation | Bandwidth (-3 dB) | Max Input Voltage | Input Impedance | Dynamic Range |
|---|---|---|---|---|---|---|---|
SONIC1000-BUN1 SONIC® 1000 | 10:1 | 1 GHz | ± 60 V | 1 MΩ / 0.6 pF | ± 15 V | ||
SONIC1500-BUN1 SONIC® 1500 | 10:1 | 1.5 GHz | ± 60 V | 1 MΩ / 0.6 pF | ± 15 V | ||
SONIC2500-BUN1 SONIC® 2500 | 10:1 | 2.5 GHz | ± 20 V | 2 MΩ / 0.6 pF | ± 8 V | ||
SONIC4000-BUN1 SONIC® 4000 | 10:1 | 4 GHz | ± 20 V | 2 MΩ / 0.6 pF | ± 8 V |
Step 2: Select optional Power Supply
| Image | Notepad | Article | Mains | Output Current (max.) | Noise* | Channels | Output Voltage | Power | Immunity |
|---|---|---|---|---|---|---|---|---|---|
889-09V-PS2 2ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 2 | ± 9 V | 20 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS2-L 2ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 2 | ± 9 V | 20 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS3 4ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 4 | ± 9 V | 40 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS3-L 4ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 5 mV RMS | 4 | ± 9 V | 40 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS6 8ch Power supply for remote control with USB interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 8 mV RMS | 8 | ± 9 V | 60 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-PS6-L 8ch Power supply for remote control with USB and LAN interface | 90-240 V AC, 47-63 Hz | 0.5 A DC continuous | 8 mV RMS | 8 | ± 9 V | 60 W | IEC/EN 60601-1 - EN55011-B | ||
889-09V-AP01 1ch Battery pack, >8hrs operation, no remote control | 700 mA DC max. | 1 | ± 9 V | 20 W | |||||
889-09V-PS5 International Wall Plug Power Supply PS-05 | |||||||||
890-520-900 Probe connection cable 0.5 m ** | |||||||||
890-520-915 Probe connection cable 1.5 m |
(*) Bandwidth 20 MHz
(**) The power supply cable (0.5 m) is included as standard with all PMK probes requiring a PS02/03/AP01 power supply.